Split System Installation Chelsea Heights

Split System Installation in Chelsea Heights

There’s nothing more enjoyable than coming home from a scorching day of 40 degrees and switching on your split system air-conditioning and within a matter of minutes the house and family members are cool.

Split system air-conditioning offers such the ability to be used in a variety of ways, making them difficult to beat. But like all heaters and coolers to keep them running to their maximum, they need to be maintained and serviced in a professional manner by experienced professionals. Melbourne Gas Heating offers experienced technicians who are familiar with split system air-conditioners inside and out. They specialize in all brands and models of these units and give you assurance that they can get the job done at a professional level.

We provide a variety of services that comprise the following:

• Split System Installation Chelsea Heights
• Split System Repairs
• Split System Servicing

Our team of heating and cooling professionals are licensed and fully trained to perform all kinds of tasks. If you’re looking for Split System Installation Chelsea Heights services then contact Local Heating and Cooling Professionals Chelsea Heights today and talk with one of our helpful team members.

How Do Split Systems Function?

Air conditioning splits get their name because of half the system (condenser) is located outside of the house while the other portion (fan coil) is located inside. In cooling, warm air from inside the room is brought in by the fan coil, and then is then removed, which results in cool air recirculating back into the house. The reverse cycle permits the heat pump to run in reverse in order to provide warmth on cold winter days.

Systems for split air conditioners can be installed in individual rooms, areas , or rooms connected by copper piping with an outside unit (condenser). Multiple-headed split-air conditioning units can be set up for as many as nine rooms and only one outdoor unit, and allowing for separate temperature control for each room.

What Are The Ongoing Costs With Split Systems?

One of the top brands for Split Systems is Mitsubishi Electric. For an Mitsubishi Electric GE Series 2.5KW Split System, installed in the smallest of rooms, providing regular heating & cooling during the summer and winter seasons, the annual running cost would be $272.34.

Reduced the Split System Running Costs

It’s not difficult to save on running expenses with the Split System. The model you purchase, and it’s respective star rating, you will be able to determine how much you’ll save per year. But looking beyond the initial cost and how you make use of your Split System can help as well.

Tips For Using Split Systems

• Set the thermostat to 24C and 26C to cool. Each degree less in summer will increase your running costs by around 10%.
• Use the economy setting If your split system comes with one. Ensure that you regularly service your air cooling system.
• Make sure that the sun’s heat is kept out by closing curtains as well as external blinds during the daytime. Close all doors and windows in areas that are cooled when it is split in operation.
• If the split system is shut off and the cooler outside, open doors along with windows, allowing the cool air in.
• Insulate your property to help keep the warm summer days out and cool inside in winter.
• Dress appropriately for the weather.

Why Choose Split Systems?

The wall mounted air conditioning system is the most commonly used residential air conditioning system, as they are affordable and easy to maintain.

Inverter Technology

Inverter technology is your best option for greater comfort throughout the year since it keeps the temperature at a constant level, reduces costs (less energy consumption) and generates less sound when it is it is used. This is accomplished by managing the speed of the compressor more precisely.

Affordable

Wall-mounted divided AC units are your best cost-effective option for a single room, apartment or small house as they are relatively cheap to buy (depending on how many indoor units you’ll need) and they don’t require requirement for ductwork.

Independent Temperature Control

Each indoor unit has the ability to control the temperature of the room it is installed in, thus each room is able to have distinct temperature.

Air Quality

Many Split air conditioners have air filtering functions and humidity control that control the amount of dust and humidity in the room. This allows for sensitive customers (children older, asthmatic, or allergic users) an unwinding mind and body.

Multi-Head Split Systems

Multi-Head Split Systems allow multiple indoor units to connect to a single outdoor condenser that in turn provides you with the convenience of having the ideal AC (in terms of output and physical constraints) for a particular room.

Split System FAQ

Is a split system the same as one would expect from an air conditioner?

Sure, Split System is an air conditioning system. However, there are many kinds of air conditioning systems. These which include:

• Split System Air Conditioning
• Multi- Head Split Air Conditioner
• Air conditioners that are duct-fed refrigerated

Each system operates with refrigerant and electricity under the same principles, however they are different in terms of how they are installed.

How long will it take to install a split-system air conditioner?

In general for a single split air conditioning system installation should take 3-6 hours. But, the exact amount of time may vary based on many factors such as below;

• Location and size of both indoor and outdoor unit
• The routing of copper pipes between indoor and outdoor unit
• Electrical connections from the main switchboards to A/C unit.

More Split System FAQ's

Should I replace or repair the air conditioning unit in my home?

In the majority of cases in the event that your air conditioner is at least 10-years-old and there are obvious issues with your AC there’s a good chance that it could be more affordable to replace than repair.

For help in making the right decision for your needs, speak with the team at ComfyHome to give you an honest evaluation of the state of your air conditioner.

What size split system air conditioning do I need?

The standard measurement ratio is to multiply the area of the room by a factor of 0.15 in order to determine the power of the unit in Kilowatts.

For a room area that is 40 sqm, you’ll have a Split system air conditioning unit of 6 kW. A unit that can cool the air at 2.5kW is perfect for 10-20 square meter room areas.

However, the amount of the Split system air conditioning required is also dependent on other factors such as the insulation in the room, the number of occupants and residents’ locations.

To get an accurate estimate of the necessary Split dimension, we suggest you contact us for a comprehensive analysis.

More Split System FAQ's

How long can a split system air conditioner last?

In general an air conditioner is constructed to last for 10-20 years in the an average. However, it is contingent on a variety of elements, such as the brand of the A/C, quality of the installation, routine service history and more…

It is vital to check the maintenance of Your Split System AC on a regular basis to prolong lifetime and enhance efficiency.

Do I need to wash my air conditioner’s air filter?

As per Daikin Australia, it is strongly recommended that you wash your air conditioner’s filters every 2 weeks to increase the efficiency of the system, and ultimately reduce your energy usage by 5 to 15%.

Chelsea Heights Gas Heating Services

• Carbon Monoxide Testing Chelsea Heights
• Gas Log Fire Service & Repairs Chelsea Heights
• Braemar Ducted Gas Heating Servicing & Repair Chelsea Heights
• Gas Heating Installation Chelsea Heights
• Gas Appliance Servicing & Repair Chelsea Heights
• Ducted Gas Heating Servicing & Repair Chelsea Heights
• Gas Space Heater Repair Chelsea Heights
• Brivis Ducted Gas Heating Servicing & Repair Chelsea Heights
• Gas Hot Water System Installation & Repairs Chelsea Heights
• Vulcan Ducted Gas Heating Servicing & Repair Chelsea Heights
• Chelsea Heights
• Gas Heating Repairs Chelsea Heights
• Evaporative Cooling Repair Chelsea Heights
• Gas Heating Chelsea Heights
• Gas Heating Service Chelsea Heights

What Types of Systems We Service & Repair

Each brand and style of heating has it’s own operation and maintenance Our skilled technicians have the knowledge and experience to offer first rate services on all types of heating equipment, for example:

• Ducted Heating Systems
• Evaporative Cooling Units
• Gas Space Heaters
• Gas Log Fires
• Split Systems
• Gas Hot Water Systems
• Gas Appliances

What Brands We Service

Our team is well-versed and has years of experience in repairs and maintenance of heating systems and specialize in all types and types of heating systems. We pride ourselves on having a rapid response time and dedication to excellence, efficiency , and reliability.

We service and maintain the majority of major brands of heating systems and units, including:

• Brivis
• Vulcan
• Braemar
• Rinnai, Carrier
• Pyrox, Honeywell
• Bonair, Lennox
• and many more…

8 Reasons To Hire Melbourne Heating Experts

• No Hidden Fees, Price Up Front
• Great Prices You Can Trust
• Top Quality Workmanship, Guaranteed!
• Great Reputation & Reviews
• We’re personable and friendly
• A Team of Experienced and Licenced Professionals
• Get a Free Quote and No obligation

Our Promise To You

At Melbourne Gas Heating we understand the frustration of not having hot water. This is something we do not believe anyone should need to go through. This is why we place the highest priority for hot water emergencies. All of our plumbers are courteous and reliable, without a doubt we are able to assist you in any circumstance.

We are proud of our customer service , and it is our belief that the minor things matter most.

We take pride in our excellent customer service. this is why our customers are so happy with us:

• We will always be there when we promise to be there.
• Our experts will give you an appointment when they are 30 minutes away.
• Competitive pricing upfront and expert advice prior to the start of the project.
• Always getting our hands clean after our own mess.

At Melbourne Gas Heating offer emergency and maintenance services in plumbing, electrical and heating. If you have some questions about our services, and the services we can offer, please contact us.